|
Post by twiztid47 on Oct 10, 2014 7:45:02 GMT -5
I agree with mewes5x on that. Cause I ran a 94 Chevy half ton extended cab, and it was damn near stock, and it took 1st in rice lake in 2012, and still made it through 3 more shows after that, so it's not necessarily how you build it, it's how you drive it
|
|
|
Post by CoachOsborn59 on Oct 15, 2014 20:36:46 GMT -5
Im wanting to put power steering on my 63 d200. Is it worth the time? If so does anyone have any tips or pictures of how to get it done?
|
|
|
Post by TEAM CHAOS225 on Oct 16, 2014 17:17:02 GMT -5
will a steering box off a late 80s dodge truck fit a 2000,also will a Ford cab mount in a dodge frame???
|
|
|
Post by bigcorn454 on Mar 14, 2015 19:56:27 GMT -5
I just bought an 83 ram charger looking for tips limited weld show 80s and new trucks do i build it like the 80s dodge truck? Any help would be approciated
|
|
|
Post by adams16 on Apr 13, 2015 9:23:20 GMT -5
So i just bought my first dodge and didn't know if there was any secrets out there that could help prolong the life of the truck. It's a reg. cab 95 4×4 3/4 ton. Any suggestions are appreciated
|
|
|
Post by mjhamre23 on Mar 2, 2016 16:40:37 GMT -5
ok so I am building my first derby truck. I have a 72 dodge ram extended cab long box and I have a bored 350 I rebuilt in school. would anybody have any tips on what I could do with the dodge or the easiest way to get the engine in there?
|
|
721
Heat Winner
Posts: 918
|
Post by 721 on Mar 16, 2016 10:18:24 GMT -5
THAT 4.7 IS WORTH BIG BUCKS IF IT RUNS GOOD CUZ SO MANY BLOW THE TIMING CHAIN AND WRECK THE MOTOR.LOOK IT UP ON CRAIG'S LIST.
|
|
|
Post by fbwckoz on May 8, 2016 21:07:01 GMT -5
I have run Chevys fords and dodges. My personal favorite is 94 up dodges. I prefer regular cab short box 4x4s had good luck with them with Chevy drivetrain
|
|
|
Post by rookieagain on May 9, 2016 21:27:54 GMT -5
Any one got pics of how they're doing their cage?
Rules state 4 down bars, must be 8 in off floor, must be contained inside cab, halo can be in bed if single cab, gtp can be 3 ft from front of bed all the way across but must be halo style? My first truck and don't quite understand how to keep the down bars out of my left leg and right behind my head. And would halo to frame count as down bar ya think?
|
|
|
Post by jeff1990 on May 29, 2016 21:15:16 GMT -5
Anybody know where can find 16 inch diggers for my 94 ram
|
|
db23
Heat Winner
Posts: 202
|
Post by db23 on May 29, 2016 22:25:16 GMT -5
what is your location, I have some 12 ply 7.50 16s for sale in the parts section , in wis.
|
|
|
Post by jeff1990 on May 30, 2016 8:33:43 GMT -5
Batavia NY
|
|
|
Post by rookieagain on May 30, 2016 16:22:04 GMT -5
Anybody know where can find 16 inch diggers for my 94 ram I use simple tire . Com. Had 6.00x16 for 64$ each. 7.00x16 for lil cheaper...
|
|
|
Post by hendy53 on Aug 2, 2016 4:13:01 GMT -5
Has anybody ever swapped a 72-79 4wd front axle into a '68 2wd? I'm sure it can be done I was just wondering how the steering would mount up
|
|
|
Post by derbycar112 on Oct 13, 2016 15:15:21 GMT -5
I have run Chevys fords and dodges. My personal favorite is 94 up dodges. I prefer regular cab short box 4x4s had good luck with them with Chevy drivetrain Did you do anything to the frame up front?
|
|