|
Post by rknight on Dec 14, 2011 19:27:30 GMT -5
my motor Attachments:
|
|
|
Post by yankeerebel17 on Dec 18, 2011 19:59:38 GMT -5
if i was to get a carbed 2.3, could i put the 2.5 crank in it?? would it fit right in, or would i have to get it shaved down?? would i have to get different rods or could i keep the stock ones?? and where is a good place to find the cheap 2.3 hei distributors??
|
|
|
Post by banginr3dn3ck on Dec 18, 2011 23:40:11 GMT -5
i have a 325 hp 2.3 bored 30 over milled 150 and got a high idle cam. came out of a pro 4 dirt track car . would it do gd in a 75 pinto wagon ? i am new to mini stock so jw thanks any help is welcomed
|
|
|
Post by banginr3dn3ck on Dec 18, 2011 23:43:09 GMT -5
if i was to get a carbed 2.3, could i put the 2.5 crank in it?? would it fit right in, or would i have to get it shaved down?? would i have to get different rods or could i keep the stock ones?? and where is a good place to find the cheap 2.3 hei distributors?? i have msd but if u aint runnin high rpm i would buy a points distributor
|
|
GRS#3
Heat Winner
Posts: 180
|
Post by GRS#3 on Dec 19, 2011 15:48:32 GMT -5
What's the safe amount to shave down the head?
|
|
|
Post by dangerranger5388 on Jan 7, 2012 11:24:13 GMT -5
the old ford 3 speeds everyone is using are out of a f-150. i found a auto out of a 87 f-150. straight 6 with a bolt on yolk. would it work about the same
|
|
|
Post by damracing911 on Jan 8, 2012 22:52:37 GMT -5
has anyone ever heard of using block filler, and would it work to run cooler?
|
|
|
Post by sc00ter on Jan 10, 2012 8:03:15 GMT -5
Where do i get a carb convertion kit for a 1993 8 plug 2.3
|
|
skiprip
Heat Winner
Don't talk about it, be about it.
Posts: 449
|
Post by skiprip on Jan 10, 2012 8:16:51 GMT -5
^^^ as far as I know you don't get one
|
|
boom61
Feature Winner
Posts: 1,666
|
Post by boom61 on Jan 10, 2012 15:29:13 GMT -5
I went through the same problem this summer with a 97. you can use the block but will have to get a head and lower intake from i think a pre89 2.3. then i think i found the adapter on a roundy round site.
|
|
|
Post by sc00ter on Jan 11, 2012 8:30:35 GMT -5
so i have to get a new head intake carb and pump? or is their more?
|
|
boom61
Feature Winner
Posts: 1,666
|
Post by boom61 on Jan 11, 2012 9:00:04 GMT -5
yup, and dont forget the carb adapter, coil and distributor
|
|
|
Post by sc00ter on Jan 12, 2012 8:10:13 GMT -5
yup, and dont forget the carb adapter, coil and distributor Carb adaptor? i cant just get a intake off a carb motor?
|
|
skiprip
Heat Winner
Don't talk about it, be about it.
Posts: 449
|
Post by skiprip on Jan 12, 2012 15:54:31 GMT -5
yup, and dont forget the carb adapter, coil and distributor Carb adaptor? i cant just get a intake off a carb motor? No 8 plug head don't use the same intakes as 4 plugs. And as far as I know there is no adapter for the 8 plug intake.
|
|
Brandamn
Future Icon
"if you aint on the gas you must be suckin @$$!"
Posts: 98
|
Post by Brandamn on Jan 15, 2012 16:58:13 GMT -5
would rollor rockers be better than just the flat tap ones?
|
|