|
Post by marshall on May 16, 2022 19:34:45 GMT -5
is there a way i can change the steering column in the v6 camry 1999? u dont know if there is anti theft on these or not also i need help on a simplified harness.
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on May 16, 2022 20:01:34 GMT -5
Man with them rules there will be ALOT of cheated up cars for DAM sure. i would put square tube inside front frame before welding up the bumper.
wire harness check out zacksworkshop on utube. no anti theft on that old of a camry least non of mine do from 93 to 2000.
|
|
|
Post by marshall on May 16, 2022 21:11:19 GMT -5
Man with them rules there will be ALOT of cheated up cars for DAM sure. i would put square tube inside front frame before welding up the bumper. wire harness check out zacksworkshop on utube. no anti theft on that old of a camry least non of mine do from 93 to 2000. frames get drilled after... and this is a youth class car my dad wont let me out square tube in there i wanted to go like 6 inches back but he said no.
|
|
|
Post by marshall on May 16, 2022 21:58:36 GMT -5
Man with them rules there will be ALOT of cheated up cars for DAM sure. i would put square tube inside front frame before welding up the bumper. wire harness check out zacksworkshop on utube. no anti t heft on that old of a camry least non of mine do from 93 to 2000.v6 camrys v6 camrys all have the chipped key and i do not know how to bypass it not even zacksworkshop does
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on May 17, 2022 17:40:27 GMT -5
Hey man tell your dad THANK YOU for not letting you cheat.lol
|
|
|
Post by keithlamb on May 25, 2022 23:26:09 GMT -5
Anybody know if you can put a standalone wire harness on a 99 V6 Camry
|
|
|
Post by dentfam on Jun 11, 2022 1:25:43 GMT -5
87 Camry starts fine runs fine till I shut it off then won’t start back up for a half hour then starts and runs fine I changed the igniter and it fixed it for a couple days then started doing it again
|
|
|
Post by superM on Jun 19, 2022 8:18:52 GMT -5
Easy solution for newer single fuel line Camry if you want to use either E2000 pump or have a different stock type fuel pump that requires a regulator and return line. Fuel filter for a 99-04 Corvette has a built in regulator and return line. www.summitracing.com/parts/wix-33737
|
|
|
Post by x13mopar on Jul 10, 2022 11:52:46 GMT -5
2003ish Toyota sienna 3.3, ran fantastic until I used the front. The rail buckled slightly but not terribly, and now it won't start. It cranks and fires but will not run, any ideas why?
|
|
|
Post by hellbent09 on Aug 15, 2022 19:54:45 GMT -5
Is there a way to Hotwire a distributor in a 91 Camry? Car ran great and pulled the air bags out. Not sure if anything g got messed up but now has no spark at all
|
|
|
Post by derbyguy728 on Aug 17, 2022 11:55:45 GMT -5
Hey, I’m running a 05’ Corolla and began fabricating a fuel tank. I was wondering if these cars are also a one line system without return? Any help is appreciated. Thanks
|
|
|
Post by ADDICTEDtoIMPACT on Oct 30, 2022 8:20:52 GMT -5
Any bad things about 02 or newer camry? Not exactly sure what year but I know it's in those model years. I just haven't stopped to look at it yet. V6 I'm pretty sure
|
|
|
Post by marshalltucker on Dec 4, 2022 1:01:31 GMT -5
are the 97-99s harder than the 92-96 camrys? im asking because the 92-96 seems wayyy easier to wire and such than a 97-99 and ive heard the 97-99s are harder.
|
|
|
Post by C4 on Dec 4, 2022 11:14:49 GMT -5
From what I understand, the structural difference between a 92-96 and a 97-01 is in the C pillar, making the back of the 92-96 a little better to work with. Fronts should be about the same.
That's just years of reading and watching. I have some of both sitting here but have never built one.
|
|
|
Post by superM on Dec 4, 2022 14:54:52 GMT -5
From what I understand, the structural difference between a 92-96 and a 97-01 is in the C pillar, making the back of the 92-96 a little better to work with. Fronts should be about the same. That's just years of reading and watching. I have some of both sitting here but have never built one. Maybe an overgeneralization but in my experience, the newer the Camry - the more pre-bending in the back is required. 88-91: minimal 92-96: more 97-99: some more 00-01: may bend really weird without it. Humps collapse and blow out seams above wheel
|
|