|
Post by C4 on Dec 2, 2021 12:39:49 GMT -5
I got an 80s model Camry square body going to run it no matter what but I was just wondering pros and cons about it. Stock gut n go show stock bumper no welding. Thank you! That's the right class to run it in.
|
|
|
Post by Hit Hard or go HOME on Dec 2, 2021 13:15:10 GMT -5
I got an 80s model Camry square body going to run it no matter what but I was just wondering pros and cons about it. Stock gut n go show stock bumper no welding. Thank you!
That's the right class to run it in.
That bad?
|
|
|
Post by C4 on Dec 2, 2021 14:18:55 GMT -5
I got an 80s model Camry square body going to run it no matter what but I was just wondering pros and cons about it. Stock gut n go show stock bumper no welding. Thank you! That's the right class to run it in. That bad? Not that bad, but not that good either. There are many other popular models, including newer Camry's that have a lot more to gain in a medium-heavy build class. Therefor it is my opinion that a gut & go class is the right place for a pre 91 Camry. If there is anything at all that you can get away with to better secure the engine & trans mounts, do it.
|
|
|
Post by Hit Hard or go HOME on Dec 2, 2021 15:14:26 GMT -5
Oh ok thank you!!
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on Dec 11, 2021 23:48:19 GMT -5
91/v6 vs 98/4 cyl camry in bone stock show ? front bumper swap allowed .
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Feb 2, 2022 13:48:32 GMT -5
Any one willing to share pic of how you all are putting fullsize bumpers on a bubble camry for like gut n go? I ran a 80s yota before but was allowed shocks. I'd like to get idea of ways to hold it so it won't just rip loose
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on Feb 3, 2022 14:41:32 GMT -5
Depends on rules to mount front bumper . Stock rules just hard nose and weld good.
|
|
|
Post by derbyfreak6187 on Apr 21, 2022 18:09:26 GMT -5
Any one ever ran a Prius Before
|
|
|
Post by derbyrat2 on May 2, 2022 13:18:22 GMT -5
How are you guys removing the bulky ABS box on the passenger fender?
I have a 95 Camry v6. And I don’t wanna touch anything without asking first. Knowing how much wiring these things have.
|
|
|
Post by x13mopar on May 5, 2022 8:49:41 GMT -5
Anyone run a Sienna? We're running a minivan class and one of the cars is a 2001 Toyota van. Interwebs say its based heavily on the carry, especially up front.
|
|
|
Post by marshall on May 12, 2022 12:02:42 GMT -5
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on May 12, 2022 20:15:43 GMT -5
How are you guys removing the bulky ABS box on the passenger fender? I have a 95 Camry v6. And I don’t wanna touch anything without asking first. Knowing how much wiring these things have. remove it all and run new brake line to rubber brake hose on both sides. splice both together and into the master. remove everything in rear for brakes. I MEAN EVERYTHING JUST LEAVE HUB BEARING ECT TO MOUNT A TIRE.
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on May 12, 2022 20:17:19 GMT -5
Anyone run a Sienna? We're running a minivan class and one of the cars is a 2001 Toyota van. Interwebs say its based heavily on the carry, especially up front. Any mini vans are touch let alone a yota van.lol
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on May 12, 2022 20:20:18 GMT -5
ya aloud square tubing ? if not go to a junk yard and get a mazda 3 front bumper .i believe the years are mid 90's to 2000.
|
|
|
Post by marshall on May 16, 2022 12:50:49 GMT -5
ya aloud square tubing ? if not go to a junk yard and get a mazda 3 front bumper .i believe the years are mid 90's to 2000.
|
|