improse
Feature Winner
Posts: 1,203
|
Post by improse on Jul 17, 2020 22:48:05 GMT -5
you make a simple wire harness ? will eliminate all that $hit.
|
|
|
Post by derbymann on Jul 17, 2020 23:31:41 GMT -5
this isnt a camry
|
|
|
Post by derbymann on Jul 17, 2020 23:35:34 GMT -5
im not sure what it came off off its 1/4 thick with no backing
|
|
|
Post by fallinskiestwice on Jul 18, 2020 7:30:04 GMT -5
i would put a softer, flatter bumper on that corolla. Shorten that frame if allowed also. There isn't much to those front ends. Idk about corolla, but w body wheels fit on camrys.
|
|
boom61
Feature Winner
Posts: 1,666
|
Post by boom61 on Jul 18, 2020 10:08:29 GMT -5
Normally I'm all about shortening, but don't know if I would on the newer Corollas. Since they have the plastic intake up front I would want some "crush room" between the front of the car and intake. I think I would probably ditch the fan too so you have some room between the rad and intake. Corollas will take a beating and keep going but are far from being hard cars no matter what kind of build.
|
|
|
Post by derbymann on Jul 18, 2020 12:25:08 GMT -5
lol it has a aluminium intake that bumper is hallow its just a skin over the factory bumper im also thinking of welding the cross member to the frame
|
|
boom61
Feature Winner
Posts: 1,666
|
Post by boom61 on Jul 18, 2020 14:15:32 GMT -5
Either way, start hitting with the intake and you are going to have problems.
|
|
|
Post by fallinskiestwice on Jul 19, 2020 9:07:16 GMT -5
A shortened frame with no radiator or core support will keep your intake cleaner longer imo
|
|
|
Post by derbymann on Aug 3, 2020 21:57:38 GMT -5
i think I am going to x the rad support with 9 wire and then put it between the condenser and radiator then boltind the fenders welding cross member alredy pushed the spair tire up all the way using square tubing with a chevy chrome any other ideas or thoughts
|
|
|
Post by juiceyjdawg on Aug 17, 2020 15:44:12 GMT -5
1998 camry with pop metal control arms... any other years have steel thats a direct replacement?
|
|
10mm
Future Icon
Posts: 125
|
Post by 10mm on Aug 27, 2020 21:25:11 GMT -5
1996 camry Rear suspension? Is it better to leave it alone or has anyone raised it completely up and welded it solid?
|
|
|
Post by fallinskiestwice on Aug 28, 2020 12:01:45 GMT -5
Unless you make your own trailing and control arms i would just leave it.
|
|
10mm
Future Icon
Posts: 125
|
Post by 10mm on Sept 6, 2020 19:51:44 GMT -5
Looking to give my 2.2 a lil more power. Has anyone built one yet?
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on Sept 7, 2020 1:11:47 GMT -5
not being a dick but since when has horsepower won a derby ?
|
|
|
Post by amkear613 on Sept 12, 2020 8:26:32 GMT -5
I mean hector is running 3 Honda’s with spoon engines and he just went to harry’s And ordered 3 T66 turbos with NOS and a motel exhaust.
|
|