|
Post by clintonqs on Jun 30, 2015 13:06:01 GMT -5
I picked up a accent over the winter seemed alright parked it till the other day now seems like its takeing of in 2nd gear is there any way to hot wire trans on these
|
|
|
Post by derbyfreak6187 on Jan 8, 2016 19:58:46 GMT -5
I need to know how to stiffen cv shafts on a 2002 hyaundi accent I keep braking them every time I run it
|
|
|
Post by joe7morrison on Mar 5, 2016 18:14:12 GMT -5
Alternator in my 01 accent is junk, pulley will not spin, and I don't to spend the $. can I bypass it and run off the battery? Thanks
|
|
boom61
Feature Winner
Posts: 1,666
|
Post by boom61 on Mar 5, 2016 21:37:45 GMT -5
Is this what the belt routing looks like? Looks like you might be able to get a smaller belt and just walk it on the water pump.
|
|
|
Post by joe7morrison on Mar 6, 2016 0:53:49 GMT -5
Awesome, thank you! I'll see what I can find for a belt. I appreciate it.
|
|
|
Post by tunnelvisionracing on Apr 5, 2016 22:10:02 GMT -5
2002 elontra....anything other then the alt. wire under the rad and harness in the fender?thinking on stripping itand flipping it for profit.
|
|
|
Post by splash on Apr 24, 2016 20:55:28 GMT -5
I taking my elantra 2002 to a stock show in may and would like to have info on what can be done on this car. I can change my bumper for another one of compact cars !!
thanks
|
|
|
Post by splash on Apr 28, 2016 21:25:09 GMT -5
Up need info
|
|
|
Post by STROMI 121 on Apr 28, 2016 22:45:01 GMT -5
So, whats the question?
|
|
|
Post by splash on Apr 29, 2016 20:35:41 GMT -5
I'm taking my elantra 2002 to a stock show in may and would like to have info on what can be done on this car.
I can change my bumper for another one of compact cars !!
is stock bumpers good ? do we tuck trunk ? do we notch ?
any wires to move ?? anything to do with the tranny or engine ?
i'd like to have feedback from somebody who raced a elantra !
|
|
|
Post by STROMI 121 on Apr 29, 2016 20:46:23 GMT -5
I'm taking my elantra 2002 to a stock show in may and would like to have info on what can be done on this car.
I can change my bumper for another one of compact cars !!
is stock bumpers good ? do we tuck trunk ? do we notch ?
any wires to move ?? anything to do with the tranny or engine ?
i'd like to have feedback from somebody who raced a elantra !
Is the stock front bumper fiberglass like most of them? If so it has to be replaced with something steel. Personally, I tuck the trunk on every compact I run. I don't think notching or excessive prebending is really necessary on these cars. I have never seen one go down. Maybe it has happened, But not in my experiences.
|
|
|
Post by splash on May 1, 2016 19:48:46 GMT -5
started working on the elantra today all stripped and started to build
got the wires that pass into the left front fender to pass elsewhere i was able to cut all wires that past in the front subframe except one wire that goes to the air bag sensors ( car wouldn't start if it was cut
here's a picture of front bumper good or toss and replace by ??
|
|
|
Post by splash on May 8, 2016 19:53:47 GMT -5
is last post picture of front bumper good or toss
can we weld tranny or driveshaft ??
where is gas pressure regulator located ??
|
|
|
Post by splash on May 16, 2016 12:07:03 GMT -5
my elantra 2.0L 2002 runs great at idle but lacks power in drive position, reverse and low 1 doesn't seem better !
took cat off and put a stack, no more maf, everything after the TB was took off. Car throws black smoke with lack of power, but was this way before i started working on it, it was sitting since 2 years.
The spark plugs are black, i changed them no difference !!
Any ideas for me ??
|
|
|
Post by buickbeasty on May 16, 2016 18:11:22 GMT -5
put maf back on.
|
|