|
Post by DemolitionMissions on Aug 9, 2013 7:20:41 GMT -5
Bend frame instead of notch?
|
|
|
Post by dseager54 on Aug 9, 2013 7:58:44 GMT -5
There's really not suppose to be any pre blending but they give you a little wiggle room. And is there anything I can do about the shifter. Its bolted right infornt of the master cyl. Don't know where we could put a floor shifter or not
|
|
|
Post by DemolitionMissions on Aug 9, 2013 8:20:52 GMT -5
Put in a floor shifter if you want. But from how stock of the rules sound..shifter will be less of your problem.
|
|
|
Post by dseager54 on Aug 9, 2013 8:32:48 GMT -5
Put in a floor shifter if you want. But from how stock of the rules sound..shifter will be less of your problem. yeah that's what I'm afraid of. We'll figure something out,always do
|
|
|
Post by demozast on Aug 11, 2013 21:35:50 GMT -5
In the engine compartment I know I have to move the engine computer box......Are there any of the other boxes that I have to keep? Not sure if they are fan relays or tranny modules or what. 93 Taurus 3.8 L is what Im building.
|
|
|
Post by DemolitionMissions on Aug 12, 2013 7:50:41 GMT -5
Computer unit attached to rad core support needs moved. Move Solenoid.
|
|
|
Post by mccluremafia96 on Aug 13, 2013 5:48:23 GMT -5
I cut struts to pieces and rebuilt with pipe. Going to run this Friday if they hold up ill post how I did it.
|
|
|
Post by demozast on Aug 18, 2013 21:59:37 GMT -5
Ran mine today......Both rear sub frame bolts pulled through and disconnected the steering. Sub is now laying on the trailer. 3 or 4 hits is all it took to do that
|
|
|
Post by DemolitionMissions on Aug 19, 2013 8:48:47 GMT -5
Ran mine today......Both rear sub frame bolts pulled through and disconnected the steering. Sub is now laying on the trailer. 3 or 4 hits is all it took to do that Rusty body mount bolts?
|
|
|
Post by mccluremafia96 on Aug 19, 2013 18:11:55 GMT -5
Ran mine last Friday night held up great only problems was fuel line blew apart twice and wires to starter failed. All fixed now, built struts held up awesome, had bumper on back it fell off but back end packed in and up, and front held up good especially with track shot on mustang.
|
|
|
Post by DemolitionMissions on Aug 19, 2013 19:54:09 GMT -5
pics of struts?
|
|
|
Post by demozast on Aug 27, 2013 15:18:24 GMT -5
We took out a bunch of the unneeded wiring inside the car. Anyone know how to make it so the alternator will charge yet? Right now it doesn't.
|
|
|
Post by mccluremafia96 on Sept 16, 2013 12:29:31 GMT -5
How do you post pictures.
|
|
|
Post by DemolitionMissions on Sept 16, 2013 12:38:18 GMT -5
|
|
|
Post by taterjuice on Oct 17, 2013 7:44:23 GMT -5
Anyone been welding the diffs on these Taurus ? Is it a major pita to do ?
|
|