|
Post by cheezwhiz31 on Sept 25, 2021 10:54:43 GMT -5
Any 06+ I have looked at has had steel lowers at a minimum. good to know... Mine always came without out anything up front
|
|
owen11x
Feature Winner
Ford makes it, Chevy shakes it, Mopar breaks it!
Posts: 2,584
|
Post by owen11x on Sept 25, 2021 14:45:01 GMT -5
Any 06+ I have looked at has had steel lowers at a minimum. good to know... Mine always came without out anything up front Joey how hard was it to fab the one you put the imperial k frame and torsion bars in?
|
|
|
Post by cheezwhiz31 on Sept 26, 2021 0:04:39 GMT -5
was nice and easy in my eyes had to pull rails a little bit but set right into the sub and cut rear member some and weld it in like setting a sub frame car into a lower k frame. best of both worlds got the steering and mounting of a old car with the strength of the new style...
kinda forgot about that one glad you brought it up....
would maybe fit a 03 allowed can re stub show..... now a days....
|
|
Punisher 66J
Feature Winner
F**K WELD CLASS, STOCK IS FOR TRUE DERBY DRIVERS!!!
Posts: 3,789
|
Post by Punisher 66J on Sept 26, 2021 6:25:33 GMT -5
I can't get away with it for stock but I wonder how one of my cordoba k members would work
|
|
|
Post by tman58 on Nov 8, 2021 22:34:31 GMT -5
Got a 2010 p71 vic wondering what a arms and front setupnis good to put on it like switch a arms out with 80s style or what
|
|
|
Post by tman58 on Nov 10, 2021 12:13:19 GMT -5
I don't think I am aloud to tuck the trunk lid. But thank u for the info. Do u know what 15in rims will fit on the car. Its a 04 p71. It had 16in rims
|
|
al14
Future Icon
Posts: 3
|
Post by al14 on Nov 22, 2021 18:59:26 GMT -5
has anyone found a good stock replacement inner tie rod that's better than factory?
|
|
|
Post by dreed121 on Nov 22, 2021 20:34:03 GMT -5
has anyone found a good stock replacement inner tie rod that's better than factory? Locals been using f150 stuff..not sure the year,but whatever year has rack and pinion..inner and putter look beefier
|
|
gm41
Future Icon
Posts: 5
|
Post by gm41 on Nov 25, 2021 15:39:22 GMT -5
Who has the best tie rod setup that will screw right into the factory rack?
|
|
owen11x
Feature Winner
Ford makes it, Chevy shakes it, Mopar breaks it!
Posts: 2,584
|
Post by owen11x on Nov 25, 2021 23:06:53 GMT -5
Who has the best tie rod setup that will screw right into the factory rack? NLR
|
|
boom61
Feature Winner
Posts: 1,666
|
Post by boom61 on Dec 3, 2021 19:30:48 GMT -5
04-08 would be the first gen F-150 with a rack. If they screw into vic racks I would go with that all day long.
|
|
|
Post by loganpenfield on Dec 13, 2021 17:10:43 GMT -5
What are you guys swapping the upper A Arms to? I swear I saw some astrovan a arms on these. Wanting to run 23s on front, have 80s spindles, front bumper can’t be any higher than 22 inches. I figured 04 F150 struts; but what would be best for a arm?
|
|
|
Post by Underbuilt on Dec 13, 2021 18:51:20 GMT -5
What are you guys swapping the upper A Arms to? I swear I saw some astrovan a arms on these. Wanting to run 23s on front, have 80s spindles, front bumper can’t be any higher than 22 inches. I figured 04 F150 struts; but what would be best for a arm? 22 to the bottom or top of bumper?
|
|
|
Post by loganpenfield on Dec 13, 2021 21:23:49 GMT -5
What are you guys swapping the upper A Arms to? I swear I saw some astrovan a arms on these. Wanting to run 23s on front, have 80s spindles, front bumper can’t be any higher than 22 inches. I figured 04 F150 struts; but what would be best for a arm? 22 to the bottom or top of bumper? Bottom of the bumper.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Dec 13, 2021 22:18:55 GMT -5
What are you guys swapping the upper A Arms to? I swear I saw some astrovan a arms on these. Wanting to run 23s on front, have 80s spindles, front bumper can’t be any higher than 22 inches. I figured 04 F150 struts; but what would be best for a arm? Move your strut location to gain height and weld into place when your happy. And I've saw 80s ford and gm a arms cut to fit.
|
|