|
Post by codyanno09 on Nov 9, 2011 15:04:54 GMT -5
Put a body bolt there.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 9, 2011 21:24:19 GMT -5
the guy that literally built my car,with "alittle" of my help,said he's NEVER seen one bend at crush box like mine did...maybe it'll be a one time deal...gonna try again early 2012...we shall see folks...
121
|
|
|
Post by cheater111 on Nov 10, 2011 12:43:46 GMT -5
121 you goin to run nacogdoches texas or yall just goin to the rumble
|
|
weiner
Heat Winner
Ford Makes It, CHEVY Shakes it
Posts: 267
|
Post by weiner on Nov 10, 2011 14:13:11 GMT -5
Any of my tilted fords bend right behind the box. between box and tranny cross member. changing the game plan a little for next year. see where I chase the bend too now.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 10, 2011 20:03:32 GMT -5
can't miss the Rumble for anything...it's gonna be a badass show
121
|
|
|
Post by zack00 on Nov 14, 2011 19:09:24 GMT -5
anybody ever tried to put 74-76 GM core support on a box vic?
|
|
|
Post by redneckracing12 on Nov 14, 2011 19:25:13 GMT -5
anybody ever tried to put 74-76 GM core support on a box vic? what would be the advantage
|
|
|
Post by Comet Cyclone on Nov 15, 2011 1:08:06 GMT -5
That's what I'm thinking... But if your missing one...I've put a truck clip on my car Just because my car was lacking one... You can pretty much make anything work with bolting and or welding.
|
|
|
Post by Wreckandrace on Nov 15, 2011 3:54:57 GMT -5
anybody ever tried to put 74-76 GM core support on a box vic? I put a 73 Chevy front clip on a box vic... I think the sheet metal was stronger, but really didn't do much over a regular vic clip... It fit alot better than I thought it would...
|
|
|
Post by zack00 on Nov 15, 2011 9:58:03 GMT -5
anybody ever tried to put 74-76 GM core support on a box vic? what would be the advantage It's just my Vic core support is F'ed and I have a gm one Layin out back..just thought I'd use what I have ..think I'll try it and see
|
|
|
Post by redneckracing12 on Nov 15, 2011 12:29:10 GMT -5
You can pretty much make anything work with bolting and or welding. figured that was the case like stated ^^^^^ you could get anything to work with a little imagination
|
|
|
Post by cory13 on Nov 18, 2011 16:55:39 GMT -5
When putting a GM 10 bolt rearend in a bubble vic. What trailing arms are you guys using?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 18, 2011 17:58:24 GMT -5
Stock Ford uppers and lowers puts you pinion pitch straight.
|
|
|
Post by derby111 on Nov 18, 2011 18:14:57 GMT -5
Does anyone have pics of how you mounted a chevy motor in one of these? Thanks
|
|
|
Post by wreckmaster on Nov 19, 2011 6:37:30 GMT -5
dont have pics but just get a set of gm frame mounts bolt to motor set where you want and weld it in
|
|