|
Post by demoderby13 on Dec 24, 2015 15:17:49 GMT -5
Just an idea I had, running an sbc the oil pan hits and was brainstorming
|
|
|
Post by redneckracing12 on Dec 24, 2015 18:42:25 GMT -5
Just an idea I had, running an sbc the oil pan hits and was brainstorming Front sump oil pan.
|
|
|
Post by brokenaxleinc on Dec 24, 2015 19:32:18 GMT -5
Aftermarket nova Chevy ll oil pan and cut lip off and weld hole shut works great ran one for year like that
|
|
|
Post by demoderby13 on Feb 6, 2016 0:47:38 GMT -5
Is the steering box 36 splines? I'm looking to make a steering column with after market u-joints and can't find the spline count online anywhere and don't have one to count.
|
|
|
Post by derby2racer on Mar 26, 2016 17:13:14 GMT -5
Anyone know if the derbyparts.com snc to chrysler cradle will work in a subframe imp, or do i need to find a robbo or other cradle?
|
|
seven1seven
Heat Winner
demolition derby.... its a way of life!
Posts: 984
|
Post by seven1seven on Mar 31, 2016 17:44:30 GMT -5
From the looks of it I would say no..
|
|
noser23x
Feature Winner
R.W.C.
Posts: 1,969
|
Post by noser23x on Mar 31, 2016 19:42:16 GMT -5
Take SBC and tuck it in the corner. Big Block Mopar!
|
|
|
Post by derby2racer on Mar 31, 2016 21:21:49 GMT -5
anyone have pics of how they mount a sbc in a subframe imp? feel free to message me, or I can text or email too. Thanks
|
|
|
Post by derby2racer on May 13, 2016 2:09:43 GMT -5
Anyone know if the power steering line for a steering box on an imp is the same fitting as a shocker? Hoping to pull my motor out of my shocker and set it in my imp.
|
|
dm440c
Feature Winner
derby drivers against drama- there's no crying in demo derby!
Posts: 2,824
|
Post by dm440c on May 14, 2016 7:41:31 GMT -5
Anyone know if the power steering line for a steering box on an imp is the same fitting as a shocker? Hoping to pull my motor out of my shocker and set it in my imp. Easiest thing I've found is to cut the two PS hoses in the metal section and weld them together to get it the way you want.
|
|
|
Post by derby2racer on May 18, 2016 9:25:29 GMT -5
When these imp subfeames finaly bend, where is the first place they let go?
|
|
x909x
Heat Winner
Posts: 293
|
Post by x909x on Jul 14, 2016 8:51:57 GMT -5
Is there a steel direct replacement for the plastic half inner fenders on a 72?
|
|
hemi1
Feature Winner
Posts: 2,425
|
Post by hemi1 on Jul 14, 2016 10:27:27 GMT -5
When these imp subfeames finaly bend, where is the first place they let go? usually behind the a-arms where the frame is narrowest.
|
|
|
Post by demoderby13 on Jul 16, 2016 16:06:55 GMT -5
When these imp subfeames finaly bend, where is the first place they let go? If you look on the inside of the frame between the a arms and the fire wall mounts, there is a square hole, that's where I've seen them go first with out preventing it
|
|
x909x
Heat Winner
Posts: 293
|
Post by x909x on Jul 19, 2016 3:12:40 GMT -5
They bend at the 1" holes in between a arms and firewall. Pinning those holes moved the bend point to right behind those holes.
|
|