Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Jul 29, 2020 12:57:18 GMT -5
Here’s mine I don’t run LS but thing to be done
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Jul 29, 2020 14:56:54 GMT -5
It will fit about like sbcm have to either run tubes to mount to your mounts or order/make a cradle. Not sure if robbo makes LS to Mopar cradles but I'm sure he could.
|
|
13car
Heat Winner
Posts: 489
|
Post by 13car on Jul 29, 2020 15:08:35 GMT -5
I have the adapters to bolt sbf and sbc mounts, I tried to look through the whole thread and didnt see much on how the SBC mounted up. any pictures on how that'd done I'd be curious. I probably will just be collecting parts for now as the derby was cancelled for this year. I was going to run the BBM engine but with more time thought the LS could be fun
|
|
owen11x
Feature Winner
Ford makes it, Chevy shakes it, Mopar breaks it!
Posts: 2,579
|
Post by owen11x on Jul 29, 2020 17:21:03 GMT -5
I have the adapters to bolt sbf and sbc mounts, I tried to look through the whole thread and didnt see much on how the SBC mounted up. any pictures on how that'd done I'd be curious. I probably will just be collecting parts for now as the derby was cancelled for this year. I was going to run the BBM engine but with more time thought the LS could be fun Bbm is just as fun as an LS. And way more fun when you can push a car across the track with torque
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Aug 3, 2020 19:24:02 GMT -5
I got a set of rules that state fab bumpers can be same size point as new yorker point. Thing is I don't have a bumper to measure one. Any of got of to give me a measurement from flat part to the top of point.
|
|
|
Post by amkear613 on Aug 4, 2020 7:34:42 GMT -5
I got a set of rules that state fab bumpers can be same size point as new yorker point. Thing is I don't have a bumper to measure one. Any of got of to give me a measurement from flat part to the top of point. I want to say if my memory serves me the point to the very back where you weld it to frame/shocks is 14 inches overall. I’d say if you used 4x4 tubing then do a 10 inch point. Been a bit since I laid eyes on one though give you a rough idea but hopefully someone here will just measure one in their stash for ya.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Aug 4, 2020 11:03:31 GMT -5
I got a set of rules that state fab bumpers can be same size point as new yorker point. Thing is I don't have a bumper to measure one. Any of got of to give me a measurement from flat part to the top of point. I want to say if my memory serves me the point to the very back where you weld it to frame/shocks is 14 inches overall. I’d say if you used 4x4 tubing then do a 10 inch point. Been a bit since I laid eyes on one though give you a rough idea but hopefully someone here will just measure one in their stash for ya. ya I was thinking it was 14 but I know some of these Mopar guys got some laying around to measure.
|
|
|
Post by 78newyorker on Aug 4, 2020 17:47:13 GMT -5
I got a set of rules that state fab bumpers can be same size point as new yorker point. Thing is I don't have a bumper to measure one. Any of got of to give me a measurement from flat part to the top of point. 14 inches. I was a little long at the point. best decor for betta tank
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Aug 4, 2020 21:00:39 GMT -5
I got a set of rules that state fab bumpers can be same size point as new yorker point. Thing is I don't have a bumper to measure one. Any of got of to give me a measurement from flat part to the top of point. 14 inches. I was a little long at the point. Thank you sir.
|
|
|
Post by amkear613 on Aug 6, 2020 21:54:14 GMT -5
I’ll be damned, can’t remember what I had for lunch yesterday but I remembered that!
|
|
Punisher 66J
Feature Winner
F**K WELD CLASS, STOCK IS FOR TRUE DERBY DRIVERS!!!
Posts: 3,789
|
Post by Punisher 66J on Aug 8, 2020 10:08:23 GMT -5
I have the adapters to bolt sbf and sbc mounts, I tried to look through the whole thread and didnt see much on how the SBC mounted up. any pictures on how that'd done I'd be curious. I probably will just be collecting parts for now as the derby was cancelled for this year. I was going to run the BBM engine but with more time thought the LS could be fun Bbm is just as fun as an LS. And way more fun when you can push a car across the track with torque Yep, I have a 400 big block in my 62 imperial and it is a pretty fun rig and loves the heat.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Sept 28, 2020 20:42:13 GMT -5
kickers on shockers. How much do kickers in rear really help a shocker? The front I already know about.
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Sept 28, 2020 21:34:57 GMT -5
A lot
|
|
mopar17
Feature Winner
Posts: 1,498
|
Post by mopar17 on Sept 29, 2020 6:40:33 GMT -5
Depends where they’re going and what else is coinciding with them......
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Sept 29, 2020 9:04:54 GMT -5
Depends where they’re going and what else is coinciding with them...... Allowed center of rearend.
|
|