|
Post by nateris00 on Jul 19, 2012 17:33:07 GMT -5
Alright sounds good I will look for something else Thanks!
|
|
|
Post by edwards7x on Jul 20, 2012 18:07:10 GMT -5
should i cut the swaybar on a 76 caddy?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 20, 2012 18:55:37 GMT -5
Noo..it shouldn't b in ur way at all
121
|
|
Tank
Heat Winner
Posts: 555
|
Post by Tank on Jul 20, 2012 20:55:42 GMT -5
Yes cut it out....
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 20, 2012 22:00:50 GMT -5
..y?..am I missin sum thin? 121
|
|
|
Post by edwards7x on Jul 20, 2012 22:58:11 GMT -5
i seen the caddy u ran..did it get into anything?
|
|
|
Post by payton4406 on Jul 23, 2012 20:13:48 GMT -5
Took body off frame today.
|
|
Tank
Heat Winner
Posts: 555
|
Post by Tank on Aug 25, 2012 10:24:22 GMT -5
Is it just my bad luck or do Caddys have more of an issue with upper ball joint interference with rims than other GM's? Have had problems with rims rubbing with the slightest bends. All have been with suspension locked out. Have to look into it further but just curious if others have had this problem as well.
|
|
|
Post by derby4 on Aug 25, 2012 19:29:21 GMT -5
yeah I do all the time as soon as one tire shot I never got a flat from one yet though so I guess dont try to fix it if its not broken
|
|
|
Post by kirbybuilt54 on Aug 25, 2012 21:32:10 GMT -5
Chang ball joint out for large bolts and you won't have as much of an issue. To gain more clearance, using the ball joint, remove the zert fitting.
|
|
Tank
Heat Winner
Posts: 555
|
Post by Tank on Aug 26, 2012 14:35:59 GMT -5
i seen the caddy u ran..did it get into anything? The blue one had it come in contact or pretty close to it, can't remember which but habe been cutting them out since.
|
|
|
Post by redneckracing12 on Nov 27, 2012 22:42:29 GMT -5
has anyone used the 74-76 Chevy horns on the 75-76 caddys with success? I tried re-configuring the stock brackets this year and it didnt turn out too well for me.
|
|
|
Post by cheater111 on Nov 28, 2012 11:08:02 GMT -5
If you know how to put the car together right they dont move firewall forward.
|
|
|
Post by cheater111 on Nov 28, 2012 12:15:09 GMT -5
I dont think impala cups would hold on a caddy. reconfigure stock brackets with a hard nose and good to go
|
|
|
Post by 117jacob117 on Dec 14, 2012 9:45:44 GMT -5
probly wrong place to ask and sorry but does a 76 caddy have a 12 bolt bia? and can you get gears for it? ive looked everywhere and cant find anything. thanks
|
|