|
Post by krazie41 on Apr 7, 2015 16:47:46 GMT -5
if somebody wants to post some pics for me i have before and after of my car from the razorback rumble this year.. i could text the pics i cant post them from my phone.....
|
|
|
Post by car185 on Apr 7, 2015 19:30:22 GMT -5
In my class i can change springs.I stretch my front springs about 2 inches and put them in the rear.and taller springs in the front.the red car a double dimpled.behind the bumper shock and base of the hump. No bumper in either car.and I did the reverse tuck in the trunk. Worked great. I'm really surprised that those did that well with no back bumpers.... Props to you...
|
|
|
Post by chooch75 on Apr 7, 2015 19:39:50 GMT -5
They were really soft which I didn't like but they rolled really good. Our cars sat really tall which in think helped
|
|
|
Post by car185 on Apr 8, 2015 10:26:07 GMT -5
They were really soft which I didn't like but they rolled really good. Our cars sat really tall which in think helped You can't really build them hard unless they have hump plates or leafs. They are what they are. Lol
|
|
|
Post by NoDakSmack on Apr 8, 2015 14:16:01 GMT -5
In my class i can change springs.I stretch my front springs about 2 inches and put them in the rear.and taller springs in the front.the red car a double dimpled.behind the bumper shock and base of the hump. No bumper in either car.and I did the reverse tuck in the trunk. Worked great. I'm really surprised that those did that well with no back bumpers.... Props to you... I lost my POS rear bumper on this car 2 minutes in, so 95% of this was with no back bumper. Trunk lid was just cut in half at the notches
|
|
|
Post by car185 on Apr 8, 2015 15:15:34 GMT -5
I have seen a few do good without bumpers but not many...
|
|
|
Post by beefybuilt104 on Apr 8, 2015 18:00:29 GMT -5
Mine from last year. Had 3 runs on it
|
|
|
Post by bigjim on May 3, 2015 15:01:28 GMT -5
Here is my 79 Ponty I'm currently getting ready for a local fair in July.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,125
|
Post by demoboy333 on Jun 2, 2015 14:41:42 GMT -5
I have seen a few do good without bumpers but not many... im with u tyler they gotta have rear bumpers atleast first run to roll up but then the second run pull the two frames together in the back to middle of trunk an chain them dam things never move then. the pic below shows best way for them to fold low. no prebending either.
|
|
|
Post by Dan-Ervine-383 on Jun 24, 2015 18:16:18 GMT -5
Running a gut and go class this weekend. Will post afters sunday. I notched the sh*t out of the back frame. Hopefully it'll work out.
|
|
|
Post by Dan-Ervine-383 on Jun 26, 2015 22:38:10 GMT -5
|
|
|
Post by SDderbyman47 on Jun 27, 2015 0:45:55 GMT -5
86 Caprice that my nephew is running this Sunday
|
|
|
Post by Dan-Ervine-383 on Jun 28, 2015 17:37:33 GMT -5
|
|
B12 Racing
Heat Winner
Earn your reputation - don't write it.
Posts: 754
|
Post by B12 Racing on Jun 28, 2015 18:41:08 GMT -5
I have found if you make aggressive notches, they will fold nicely, but quicker than desired. However, you can't have your cake and eat it, too.
|
|
|
Post by derby111 on Jun 28, 2015 23:30:50 GMT -5
Ervine those after pictures are making me worry a bit. We are building a Pontiac same rules basically as yours maybe a little less allowed even. Hopefully we get better results
|
|