|
Post by roughneck06 on Mar 22, 2019 15:49:14 GMT -5
I FIGURED THAT WOULD HAPPEN EVENTUALLY. I MAY GO WITH SHORTER SHOCKS TO ALLOW IT TO BEND ON THE HORNS INSTEAD OF THERE....
|
|
|
Post by DerbyKing88s on Mar 23, 2019 1:03:13 GMT -5
I WOULD GO WITH AS LONG OF SHOCKS AS POSSIBLE AND PLATE THE FACTORY ENGINE CRADLE TO KEEP IT IN PLACE, JMO
|
|
|
Post by Luke Wells on Mar 23, 2019 16:32:39 GMT -5
LOUD NOISES!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 23, 2019 20:16:09 GMT -5
Lmao,so Loud In here
|
|
|
Post by mitch8888 on Mar 30, 2019 19:00:52 GMT -5
The show I’m building for only allows the stock front bumper mounts . It’s a 74 CDV. Anybody got any ideas on how to keep these mounts from bending right away ? Allowed to weld as much as I want but only allowed 1 added plate. Anything will help . Thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 30, 2019 19:50:55 GMT -5
Man they bend fast with stock brackets
|
|
|
Post by DerbyKing88s on Mar 30, 2019 21:50:05 GMT -5
Big time
|
|
|
Post by dean88 on Mar 30, 2019 22:54:06 GMT -5
I've tried my damndest to use the stock 4-6 brackets. They just dont work. My next one that has to have stock brackets was going to run Buick front brackets.
|
|
|
Post by mitch8888 on Mar 31, 2019 10:41:24 GMT -5
I've tried my damndest to use the stock 4-6 brackets. They just dont work. My next one that has to have stock brackets was going to run Buick front brackets. So I’m kinda out for luck with running the stock brackets . I guess I’ll just weld them the best I can and hope for the best .
|
|
|
Post by dean88 on Mar 31, 2019 10:43:22 GMT -5
Be sure and slide them all the way down towards the frame then.
|
|
|
Post by alex-y4a on Mar 31, 2019 10:56:47 GMT -5
If the dog bones are tied in I would run the pointy Have any pics of the dog bones tied in?
|
|
|
Post by DerbyKing88s on Mar 31, 2019 13:03:55 GMT -5
If the dog bones are tied in I would run the pointy Have any pics of the dog bones tied in? I can pm them to u if you want
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Mar 31, 2019 13:30:18 GMT -5
If the dog bones are tied in I would run the pointy Have any pics of the dog bones tied in? All depends how your rules word nine wire or cable is how you run it. Could run them straight up to cage or if they can't touch cage then run it around the a pillar.
|
|
|
Post by DerbyKing88s on Mar 31, 2019 14:31:41 GMT -5
Ours are welded but ya
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Mar 31, 2019 16:20:29 GMT -5
rules around me down tube have to be off side bars not off dash bar.
|
|