hicks66
Heat Winner
bumper
Posts: 386
|
Post by hicks66 on Mar 30, 2019 8:45:37 GMT -5
Your rules are describing a four point cage
|
|
|
Post by Henthorn837 on Mar 30, 2019 11:01:02 GMT -5
Your rules are describing a four point cage Ok I looked up a 4 point cage on Google and it was giving me a full 4 point roll cage. Thanks for the info.
|
|
|
Post by ghost613 on Mar 31, 2019 11:51:40 GMT -5
Will the sub from a 4 door bubble lumina bolt up to a 2 door monte carlo?
|
|
|
Post by C4 on Mar 31, 2019 13:16:16 GMT -5
Will the sub from a 4 door bubble lumina bolt up to a 2 door monte carlo? They are virtually identical from the driver's butt forward.
|
|
|
Post by smashem23 on Apr 3, 2019 17:34:34 GMT -5
Does anyone have a picture of the plate that has to be removed to weld the gears to make a w body posi? Or a picture of them already welded.
|
|
|
Post by C4 on Apr 3, 2019 18:36:30 GMT -5
Does anyone have a picture of the plate that has to be removed to weld the gears to make a w body posi? Or a picture of them already welded. On these, it is a bit more in depth than an access plate. taterjuice did a fairly detailed picture-tutorial somewhere on here that covers the 4t60e and 4t65e. The 3 speed and the 440t4 are way more in depth.
|
|
|
Post by smashem23 on Apr 3, 2019 20:34:57 GMT -5
I did find taters detailed thread on how to do it pictures don’t exist anymore unfortunately. Eventually I will pry give it a try Does anyone have a picture of the plate that has to be removed to weld the gears to make a w body posi? Or a picture of them already welded. On these, it is a bit more in depth than an access plate. taterjuice did a fairly detailed picture-tutorial somewhere on here that covers the 4t60e and 4t65e. The 3 speed and the 440t4 are way more in depth.
|
|
|
Post by smashem23 on Apr 15, 2019 21:18:44 GMT -5
Question on after market shifters. I know you can use the stock cable to the trans but what about the other two cables that are ran to it? I’m assuming one is the neutral switch not sure on the other. Have never relocated a shifter so this is all new to me. Any help is appreciated!
|
|
|
Post by dixie35normus on Apr 17, 2019 0:18:44 GMT -5
How do you guys have your tank protectors set up in these? Haven’t ran one yet but after last years close call with my tank I’m considering it this year lol thanks Here is one of mine. We just had to change our rules cause people were building their "tank protectors" like that lol. Our area is split. If our rules didn't specifically say no cradles some would run them others would run gut n go
|
|
|
Post by taterjuice on Apr 29, 2019 23:56:05 GMT -5
Question on after market shifters. I know you can use the stock cable to the trans but what about the other two cables that are ran to it? I’m assuming one is the neutral switch not sure on the other. Have never relocated a shifter so this is all new to me. Any help is appreciated! the other 2 are for safety's, so you cant put it in gear without pushing on the brake pedal.
|
|
|
Post by puhtatuhchip114 on May 7, 2019 19:05:19 GMT -5
Need to swap struts to fit 14" wheels on my 98 lumina. Will any GM 14" strut bolt up to my car? Or is there a specific model that bolts up exactly the same as the 15" strut?
|
|
|
Post by fallinskiestwice on May 8, 2019 4:33:35 GMT -5
Has to be a w body strut
|
|
|
Post by cadillackid33 on May 14, 2019 11:03:03 GMT -5
I’m running my first w body this weekend. I bought it preran and I get 4 plates. Where do you suggest I put the plates? Where is it going to bend? Thanks
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on May 14, 2019 13:33:48 GMT -5
I’m running my first w body this weekend. I bought it preran and I get 4 plates. Where do you suggest I put the plates? Where is it going to bend? Thanks How big of plates an what's done already a arms forward.
|
|
|
Post by fallinskiestwice on May 14, 2019 17:51:43 GMT -5
I'd put them all on the sub at the bend. One on top, one on the side. Frame rails are paper thin, wouldn't bother plating them.
|
|