|
Post by DerbyKing88s on Jun 19, 2018 9:19:52 GMT -5
So i’d Like to hear how people crease their cars. Also we are going to use an air hammer so what is the best way to get the best creases with one? Do you start with a regular 2 pound or something then clean up with air hammer, or let the air hammer do all the work? Let me know please
|
|
|
Post by STROMI 121 on Jun 19, 2018 9:25:47 GMT -5
|
|
|
Post by DerbyKing88s on Jun 19, 2018 12:16:14 GMT -5
👍🏼👍🏼
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,229
|
Post by Landshark007 on Jun 19, 2018 12:42:39 GMT -5
Give my kids A hammer and let them beat
|
|
|
Post by Junkyarddog84 on Jun 19, 2018 16:51:19 GMT -5
Im thinking air hammering will give it an overall finish, but a good ball peen for sure to start things
|
|
|
Post by nick18sf on Jun 19, 2018 23:41:21 GMT -5
I just use a small sledge hammer with an angle on the other side. It doesn’t look as nice as most, but it gets the job done and pretty fast too!
Nick
|
|
|
Post by DerbyKing88s on Jun 20, 2018 0:28:43 GMT -5
Ya we have always used a couple different hammers but would like to go to an air hammer, the better it looks the harder it is right? Lol.
|
|
|
Post by bustedknuckle242 on Jun 20, 2018 8:02:17 GMT -5
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,125
|
Post by demoboy333 on Jun 20, 2018 8:49:35 GMT -5
I used a air hammer from start to finish on far it seems to go faster an easier an you can work more crease lines in with them. Just make sure you don't over stretch the steel or you will get holes.
|
|
|
Post by DerbyKing88s on Jun 20, 2018 9:07:02 GMT -5
That’s was my next question, what ends are you guys using, I can take pics of all the ones we have to see what would work best
|
|
|
Post by fallinskiestwice on Jun 20, 2018 9:44:34 GMT -5
That’s was my next question, what ends are you guys using, I can take pics of all the ones we have to see what would work best I cut the end off a ball peen hammer and weld it to whatever end i have sitting around
|
|
|
Post by bustedknuckle242 on Jun 20, 2018 11:44:20 GMT -5
That’s was my next question, what ends are you guys using, I can take pics of all the ones we have to see what would work best find a mechanic buddy that sees a tool truck regulary, then when you break it he can warranty it, also maybe get you a good deal on a snap on air hammer. i used the edge of mine an cracked it. I use the matco one in the link above, or i believe ski inc has them on their site
|
|
|
Post by DerbyKing88s on Jun 20, 2018 12:19:53 GMT -5
We have the big snap-on air hammer, forget the numbers on it, I also work at a body shop and have the snap-on truck there once a week basically so they would work out pretty good
|
|
|
Post by DerbyKing88s on Jun 20, 2018 18:56:19 GMT -5
This is the hammer and the attachments we have, don’t have the really wide faced one. Have a lot but most are chisels a68.tinypic.com/2cngs51. jpg[/IMG]
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 20, 2018 19:38:49 GMT -5
Get sum ear muffs
|
|