|
Post by derbyman103 on May 18, 2016 20:18:59 GMT -5
Ok. Thats what I thought. Thanks
|
|
|
Post by 4umotorsports on May 19, 2016 12:53:18 GMT -5
Only 63 days left....
|
|
|
Post by 4umotorsports on May 23, 2016 15:17:27 GMT -5
All PM's replied to
|
|
|
Post by 4umotorsports on May 30, 2016 18:45:59 GMT -5
Time is winding down...it will be showtime before you know it.
|
|
|
Post by 4umotorsports on Jun 4, 2016 9:24:47 GMT -5
I've had a few questions about the plate rule. To clarify....you are allowed 2 plates on a fresh car/truck, anywhere of your choice except for within the 6 inch gap between the rear of your front bumper shock and the front of your a arm. You are allowed 4 fix it plates on a bend, crack or rust hole. Damage to frame must be obvious/visible. Dont plate a frame just because you want a plate there unless its bent, cracked or rusted, you will have to cut. There will be no more than 6 plates total allowed. Do not add the 7th plate, you will cut. I hope this clears up any confusion on the plate rule.
|
|
|
Post by 4umotorsports on Jun 9, 2016 8:40:46 GMT -5
Ttt
|
|
|
Post by 4umotorsports on Jun 14, 2016 21:46:04 GMT -5
Its almost that time....if you have any questions feel free to ask.
|
|
|
Post by 4umotorsports on Jun 20, 2016 8:23:09 GMT -5
Just a little FYI for all you drivers that are bringing something to Sullivan.....the track will be longer this year!!!!
|
|
crazychris03
Heat Winner
Enter your message here...
Posts: 398
|
Post by crazychris03 on Jun 20, 2016 18:01:03 GMT -5
Just a little FYI for all you drivers that are bringing something to Sullivan.....the track will be longer this year!!!! on ur plate rule how thick can your plate be and how long can it be .can you put it anywhere on the frame one perun car
|
|
|
Post by 4umotorsports on Jun 20, 2016 19:25:46 GMT -5
you are allowed 2 plates on a fresh car/truck, anywhere of your choice except for within the 6 inch gap between the rear of your front bumper shock and the front of your a arm. You are allowed 4 fix it plates on a bend, crack or rust hole. Damage to frame must be obvious/visible. Dont plate a frame just because you want a plate there unless its bent, cracked or rusted, you will have to cut. There will be no more than 6 plates total allowed. Do not add the 7th plate, you will cut. I hope this clears up any confusion on the plate rule. The size allowed is 4"x6" 1/4" thick max.
|
|
crazychris03
Heat Winner
Enter your message here...
Posts: 398
|
Post by crazychris03 on Jun 23, 2016 17:37:53 GMT -5
Are you aloud hump plats on the mod class cars and if so how big can you have
|
|
|
Post by 4umotorsports on Jun 24, 2016 22:06:53 GMT -5
Are you aloud hump plats on the mod class cars and if so how big can you have Yes, 22 inch hump plate, 1/4" thick. Must be contoured to the frame.
|
|
squig8s
Heat Winner
Just 4 Fun
Posts: 926
|
Post by squig8s on Jun 27, 2016 12:03:16 GMT -5
TRUNK
You can use four ¾” bolts in trunk and 2 may go through frame with washers no bigger than 6 inches outside diameter.
BODY MOUNT BOLTS
May be replaced with up to ¾” bolts. All bolts must be inside frame with maximum washer size of 3”.
So am i allowed 8 bolts in the trunk? 4 stock body mounts plus the four?
|
|
|
Post by 4umotorsports on Jun 27, 2016 14:03:43 GMT -5
TRUNK You can use four ¾” bolts in trunk and 2 may go through frame with washers no bigger than 6 inches outside diameter. BODY MOUNT BOLTS May be replaced with up to ¾” bolts. All bolts must be inside frame with maximum washer size of 3”. So am i allowed 8 bolts in the trunk? 4 stock body mounts plus the four? No, only 4 body mount bolts in the trunk. 2 of the 4 are allowed to go thru both sides of the frame, and 2 can only go thru 1 side of the frame, just like the remaining body bolts.
|
|
|
Post by 4umotorsports on Jul 5, 2016 14:12:39 GMT -5
I believe I have answered all messages. If I didnt reply to yours, feel free to send me another message and I will get back to you asap.
|
|