|
|
Post by derbyfreak6187 on Feb 13, 2014 16:48:08 GMT -5
I in need of a GM wire diagram of any on has the link
|
|
|
|
Post by pasterofmuppets on Feb 13, 2014 16:52:47 GMT -5
GM what? Year, make and model of engine differ greatly. Carbed or EFI? 4,6, or 8 cylinder?
Use the thread locator. There are wiring diagrams for practically everything here already. That or be more specific.
|
|
|
|
Post by derbyfreak6187 on Feb 13, 2014 17:13:24 GMT -5
I need it for 1972 oldsmobile delta 88 for a 350 carb motor
|
|
shake
Heat Winner
Posts: 896 
|
Post by shake on Feb 13, 2014 17:35:52 GMT -5
Are you fixing this car ?
Or derbying it ?
Theres not a lot to the wireing in them
If crashing , rip it all out and run what you need.
Swap to a one wire alt if your running one.
Dont get a whole lot simpler
|
|
|
|
Post by pasterofmuppets on Feb 13, 2014 17:51:26 GMT -5
You need:
- Positive Battery Cable from large post on starter to hot side of battery
- Negative Cable grounded to block to negative side of battery
- Starter wire off positive side of solenoid on the starter through a toggle switch/push button and to the hot side of the battery
- Coil wire from positive side of coil through a toggle switch to hot side of battery OR if running HEI distributor use the hot wire from the connector clip hot side through toggle.
That will get you basic wiring to where it will start. Alternator, gauges, fans, etc are all simple and self explanatory. Add what you need.
For firing order and timing use Google. Its faster than me typing it out. Lol
|
|
|
|
Post by derbyfreak6187 on Feb 13, 2014 17:57:00 GMT -5
I would like a picture diagram
|
|
shake
Heat Winner
Posts: 896
|
Post by shake on Feb 13, 2014 18:06:51 GMT -5
|
|
|
|
Post by pasterofmuppets on Feb 13, 2014 20:45:57 GMT -5
I would like a picture diagram Need us to come wire it for you too? Use the thread locator. We told you how to do it, and how to find the info you needed. Lol |
|
|
|
Post by STROMI 121 on Feb 14, 2014 15:10:35 GMT -5
Tuff crowd...LOL
|
|
|
|
Post by derbyfreak6187 on Feb 14, 2014 16:50:42 GMT -5
Shoot if u wann come built it and wire it up for me I have no problem with it lol
|
|
shake
Heat Winner
Posts: 896
|
Post by shake on Feb 14, 2014 17:01:37 GMT -5
Shoot if u wann come built it and wire it up for me I have no problem with it lol I would If I was closer...But I would wanna drive as well 
Did the picture help ?
the difference between hei and the points set up is pretty simple
|
|
|
|
Post by derbyfreak6187 on Feb 15, 2014 16:57:21 GMT -5
Ya thanks a lot guys for all the help
|
|
demodave216
Feature Winner
If You Don't Want A Sarcastic Answer Then Don't Ask A Stupid Question!
Posts: 3,471
|
Post by demodave216 on Feb 17, 2014 18:41:59 GMT -5
Just curious if you're running the 350 Olds that came in it, or changing it to a Chevy?
|
|
|
|
Post by derbyfreak6187 on Feb 17, 2014 19:28:31 GMT -5
Yay I am running the 350 olds what the different between the 350 chevy or a 350 olds I can't find stacks for the car cause everyone tell me there different I have a set of 350 chevy stacks but they say that they won't fit any one make a cheap pair of stack anyone know
|
|
|
|
Post by pasterofmuppets on Feb 17, 2014 19:36:24 GMT -5
Chevy stacks won't fit. DEC headers makes them for Oldsmobiles or use a manifold gasket as a template and make your own
|
|
