|
Post by STROMI 121 on Mar 31, 2014 20:03:09 GMT -5
this is the cheapest place I found for the steering universals they have ones that fit a vic box and old iron. www.poske.com/
|
|
teamele1x
Heat Winner
Everybody love Everybody
Posts: 542
|
Post by teamele1x on Apr 6, 2014 22:42:01 GMT -5
this is the cheapest place I found for the steering universals they have ones that fit a vic box and old iron. www.poske.com/Maybe I missed it but what spline do I need to order for the vics (not around a car right now obviously)
|
|
|
Post by STROMI 121 on Apr 7, 2014 7:41:33 GMT -5
I think it is 3/4 36 spline but I could be wrong.
|
|
|
Post by moparpowered60 on Apr 7, 2014 8:32:22 GMT -5
Yep its 3/4" 36 spline for vics
|
|
teamele1x
Heat Winner
Everybody love Everybody
Posts: 542
|
Post by teamele1x on Apr 7, 2014 8:39:57 GMT -5
Thanks
|
|
|
Post by whittaker727 on Sept 21, 2014 20:17:34 GMT -5
It's quite possible I missed it, but I've read back twice. How much engagement should you have on the slip portion before it's collapsed? 4-6" seems like it would be plenty, but I would hate to have it pull apart.
|
|
|
Post by pasterofmuppets on Sept 21, 2014 21:35:28 GMT -5
I use 6" of engagement. Had an impala bend weird and pull out almost 4".
|
|
|
Post by redneckracing12 on Sept 22, 2014 20:08:02 GMT -5
On the astro van shafts when using them in crown vics I set them up so they are pulled almost all the way out. Once nosed pretty good they are almost collapsed the whole way.
|
|
|
Post by beefybuilt104 on Jan 29, 2018 13:29:29 GMT -5
Building a column for a 90 vic. Got a steering shaft from an Astro van and I can't get the splined part to go onto the gearbox. Am I missing something? Is there a difference in the gearboxes or steering shafts.? Thanks
|
|
|
Post by redneckracing12 on Jan 29, 2018 14:01:02 GMT -5
Building a column for a 90 vic. Got a steering shaft from an Astro van and I can't get the splined part to go onto the gearbox. Am I missing something? Is there a difference in the gearboxes or steering shafts.? Thanks It's won't go on, iv heard of guys spreading it to fit. Iv never done it that way tho I cut the splined portion off the rag joint and weld it to the end of the astro shaft.
|
|
|
Post by beefybuilt104 on Jan 29, 2018 15:05:40 GMT -5
Building a column for a 90 vic. Got a steering shaft from an Astro van and I can't get the splined part to go onto the gearbox. Am I missing something? Is there a difference in the gearboxes or steering shafts.? Thanks It's won't go on, iv heard of guys spreading it to fit. Iv never done it that way tho I cut the splined portion off the rag joint and weld it to the end of the astro shaft. Ok I wasn't sure because everybody else made it seem like it is supposed to go right on so I wasn't sure.
|
|
|
Post by STROMI 121 on Jan 29, 2018 16:25:43 GMT -5
Spread it open with a good screwdriver or cold chizel. Then tap it on with a hammer. It's 1/6 smaller. No biggie.
|
|