|
Post by punisher on Apr 3, 2012 8:17:16 GMT -5
I build only Turbo 400 trans for the Derby world. All builds are fresh all new seals,clutches,gaskets, etc. All build comes tapped for a slider and include a pipe dipstick Some Prices 1st rev only 600 plus core Add 50.00 to cut a bell Converters 110.00 on up Pipe dipstick 30.00 shipped to your door Fluid 9.00 a quart full synthetic Fluid 6.50 a qt synthetic mix Steel bell housing 300.00 Short steel tail housing 200.00 Midplate go between pan and trans( improved) 105.00 Super plate 125.00 (make your own dp or motor mount) Fittings 20.00 Hoses 85 to 185Takes the screwing around out of it Threaded rod 25.00 for 6ft stick of 1" Have other sizes Steel bells are usually 47.00 to ship I do ship it's usually around 150.00 or so. Like us on Facebook! www.facebook.com/PunisherTrans#!/PunisherTrans ^ Copy and paste in URL box!
|
|
nfa50
Future Icon
Posts: 7
|
Post by nfa50 on Apr 5, 2012 7:07:25 GMT -5
Wondering if you'll have some dip sticks and any braces in stock at SE thanks
|
|
|
Post by punisher on Apr 5, 2012 8:35:34 GMT -5
Yes- I should have a couple of each.
Might have a trans or two.
|
|
|
Post by drivingbigtoys on Apr 8, 2012 3:44:01 GMT -5
This guy builds the best trans in the business!! I run my trans 7 times this last year and hasn't failed me yet! Excellent customer service!
|
|
|
Post by punisher on Apr 8, 2012 15:27:31 GMT -5
^ Thanks- I will get some threaded rod from you sent PM
|
|
mat45
Heat Winner
Posts: 371
|
Post by mat45 on Apr 8, 2012 17:52:12 GMT -5
Did you receive the check I sent?
|
|
|
Post by punisher on Apr 8, 2012 19:49:39 GMT -5
yes
|
|
|
Post by Elvis2nd on Apr 10, 2012 15:12:46 GMT -5
got pipe dipsticks, look good, thanks
|
|
|
Post by punisher on Apr 11, 2012 9:00:15 GMT -5
^ no Problem thanks for the business
|
|
|
Post by punisher on Apr 11, 2012 9:02:14 GMT -5
I bought a different trailer. So I won't have the black beast. Meeker I won't have time to install the pizza oven. I will have it for MM.
|
|
|
Post by punisher on Apr 15, 2012 15:10:16 GMT -5
Thanks to everyone that bought from me and ran my stuff.
I had fun driving in the 80's class except for the 3" hole in my oil pan where a rod went through it.
DMP you guys are great and thanks for representing my stuff in the 80's class.
See everyone around I am taking a couple of days off been a rough couple weeks of building.
|
|
|
Post by punisher on Apr 20, 2012 7:43:51 GMT -5
Need to know by June 1st for MM.( These are reg case builds)
Custom builds I need to know by May 15th
|
|
|
Post by bighoss40 on Apr 22, 2012 19:52:19 GMT -5
Can you post a pic of the pipe dipstick? Thanks And is $25 including S&H?
|
|
|
Post by punisher on Apr 24, 2012 7:55:56 GMT -5
The brace around the bell is the punisher brace. Made to be universal fit on chevy bell housings. (some pieces are not pictured) Brace that goes between the pan and trans mauler brace The dipstick is pictured.
|
|
|
Post by punisher on Apr 24, 2012 8:25:40 GMT -5
Yes on the shipping
|
|