|
Post by bholt07 on Jan 27, 2017 21:42:12 GMT -5
The tfi... Use the bottom three wires on the elect plug, cut the others off. the black wire goes to a body ground, the red wire goes to hot ign source and the green to the tack neg side of coil. Use any coil. Never tried it but a quick 4m.net search came up with this
|
|
|
Post by CHUNKY MONKEY 13 on Jan 28, 2017 1:41:53 GMT -5
Yup tfi is awesome lol. It's all I have ever used
|
|
|
Post by bassmaster on Jan 28, 2017 13:13:39 GMT -5
Yup tfi is awesome lol. It's all I have ever used Would u mind sharing how to wire one up and what coil u use?
|
|
|
Post by CHUNKY MONKEY 13 on Jan 28, 2017 17:56:37 GMT -5
Wire it like bholt07 posted and I use a stock ford coil fromy 90s model ford trucks
|
|
|
Post by bassmaster on Jan 28, 2017 21:31:28 GMT -5
Wire it like bholt07 posted and I use a stock ford coil fromy 90s model ford trucks Will do, thanks a lot
|
|
|
Post by mrknfsh on Apr 2, 2017 21:16:37 GMT -5
What size main jets are people using on motocraft 2 barrel carbs I have 54's in mine haven't tried it yet
|
|
|
Post by taterjuice on Apr 3, 2017 8:13:03 GMT -5
What size main jets are people using on motocraft 2 barrel carbs I have 54's in mine haven't tried it yet unless it's a pretty wild cam, I'm betting that's a bit fat.
|
|
|
Post by mrknfsh on Apr 3, 2017 19:30:05 GMT -5
What size main jets are people using on motocraft 2 barrel carbs I have 54's in mine haven't tried it yet unless it's a pretty wild cam, I'm betting that's a bit fat. What do u suggest for a stock motor no cam
|
|
|
Post by taterjuice on Apr 4, 2017 3:14:59 GMT -5
unless it's a pretty wild cam, I'm betting that's a bit fat. What do u suggest for a stock motor no cam I ran 49 or 48's in mine and it was pretty rich still. I would buy jets from 45-50 and tinker in that range personally.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 4, 2017 11:32:44 GMT -5
What size main jets are people using on motocraft 2 barrel carbs I have 54's in mine haven't tried it yet Not enough information. What carb do you have? 2100? Not all are the same size, to make an educated guess at jet sizing one would need to know size. On the 2100s there's a thing that looks like a clock on the left side of float bowl that should have a number like 1.01, 1.21, 1.23, etc. Also, what you're doing with the power valve may also change jetting.
|
|
|
Post by msmotorsports on Apr 5, 2017 13:46:53 GMT -5
Is there a adapter so I can take a duraspark distributor and run a msd box to it
|
|
|
Post by fallinskiestwice on Apr 17, 2017 16:31:12 GMT -5
Just bought a pinto with a 2.0. I'm assuming it would need a complete rebuild. Is it worth putting any time/money into or would I be further ahead to find a 2.3? Thanks
|
|
|
Post by mrknfsh on Apr 26, 2017 21:57:13 GMT -5
3 speed set up . Mine has a bolt in yoke that has the Little U bolts "missing" to hold the u joint in have you Guys found a better yoke to use can't run slider
|
|
Big Red 88
Future Icon
building and buying
Posts: 54
|
Post by Big Red 88 on Jul 12, 2017 12:17:50 GMT -5
Im new to the Ford 2.3 builds. I have a buddy that has a C6 trans that I am thinking of buying to put behind it. Anybody have any Good/Bad Experiences with these transmissions? I want a good Auto trans, but haven't had much luck locating any C4's locally so thinking this would be a solid 2nd choice. Thanks in Advance for any info.
|
|
Big Red 88
Future Icon
building and buying
Posts: 54
|
Post by Big Red 88 on Jul 13, 2017 11:04:36 GMT -5
|
|