noser23x
Feature Winner
R.W.C.
Posts: 1,969
|
Post by noser23x on Jan 8, 2024 3:08:11 GMT -5
I just read the rules again. 6 plates allowed on a fresh car. Can do anything 8" behind the bumper to help keep it on. If using bumper brackets they must be stock and in stock location. A arms 2-2"x6" straps per side. Nothing mentioned about cables to cross member. Any Hump plate? Regardless I'd throw 2 on the front each side 1 in the rear and party. Bumper I always look at driving style as well but pointy with tapered ends gives you more leeway about not side loading 1 rail. Little more forgiving since your hitting with center of bumper.
|
|
noser23x
Feature Winner
R.W.C.
Posts: 1,969
|
Post by noser23x on Jan 8, 2024 3:08:39 GMT -5
I have never seen a monte rep. Who makes them? 726 Customs on Facebook.
|
|
|
Post by rennyx on Jan 8, 2024 6:54:28 GMT -5
Yes. I have hump plates.
|
|
|
Post by rennyx on Jan 10, 2024 22:05:18 GMT -5
I will plate over the 2 little rectangular holes at the front of frame. The second will cover the idler arm holes on the passenger side. Do I put the drivers side in the same location which would be covering the steering box bolts or closer to the a arm or....?
|
|
|
Post by dreed121 on Jan 11, 2024 22:03:05 GMT -5
I will plate over the 2 little rectangular holes at the front of frame. The second will cover the idler arm holes on the passenger side. Do I put the drivers side in the same location which would be covering the steering box bolts or closer to the an arm or....? If ur allowed a plate(we use it as a washer)for the bottom of the core support spacer(we usually do a 5x5),u won’t have to plate them rectangle holes and u can use that plate elseware..weld it over the factory tab
|
|
|
Post by rennyx on Jan 13, 2024 15:59:45 GMT -5
I have the horns plated all around to the first bend. I was talking about the two little holes right after the bend. Not exactly round. What do you mean "factory tab"?
|
|
|
Post by dreed121 on Jan 14, 2024 10:04:25 GMT -5
I have the horns plated all around to the first bend. I was talking about the two little holes right after the bend. Not exactly round. What do you mean "factory tab"? The radiator support bolt tabs on the frame,have rectangle holes under them where the bumper shocks bolt..thought that was the holes u were referring to
|
|