|
Post by codyanno09 on Oct 7, 2011 3:42:41 GMT -5
10 bolt rear
|
|
|
Post by derby111 on Oct 7, 2011 8:56:51 GMT -5
thanks guys for the pics
|
|
04w
Future Icon
Go Hard or Go Home!... ""Thats what she said""
Posts: 93
|
Post by 04w on Oct 7, 2011 15:35:43 GMT -5
when you leave the trunk solid and beat it all down and prebend it, where are you dimpling or notching the rear frame? i've always tucked and notched but ready to try somethin different.
|
|
|
Post by bender10 on Oct 12, 2011 18:34:48 GMT -5
Just kinda wondering to hardnose these u leave three quarters of a inch in front of core support mount what if u cut that off rote in front of that mount? Good or bad?
|
|
|
Post by Sandgren37 on Oct 12, 2011 18:49:01 GMT -5
I have done it. Didn't have any problems with it.
|
|
67X
Feature Winner
Vision Without Execution Is Just Hallucination
Posts: 1,000
|
Post by 67X on Oct 12, 2011 20:31:48 GMT -5
Full size 10 bolts fit in perfectly in new style fords. Here's my 33 spline moser 10 bolt set up in a bubble mercury.
|
|
|
Post by bender10 on Oct 13, 2011 17:47:48 GMT -5
I have done it. Didn't have any problems with it. Did it seem to help? And I'm sure someones tried this.. But what about tilting at crushboxs a little and then at crossmember the rest of the way?
|
|
|
Post by Sandgren37 on Oct 13, 2011 18:53:42 GMT -5
I really didn't notice any difference. Its only 3/4 of an inch.
|
|
L7
Feature Winner
Posts: 1,176
|
Post by L7 on Oct 13, 2011 20:18:49 GMT -5
Full size 10 bolts fit in perfectly in new style fords. Here's my 33 spline moser 10 bolt set up in a bubble mercury. Holy body creasing! Tough looking vic
|
|
|
Post by bender10 on Oct 13, 2011 21:22:10 GMT -5
Ok thanks. Anybody tried that tilting idea? And holy body creasing is rite!! How long did that take? Heard that didn't help the bubbles at all let me know how it holds up
|
|
68X
Heat Winner
Posts: 419
|
Post by 68X on Oct 13, 2011 21:59:57 GMT -5
Full size 10 bolts fit in perfectly in new style fords. Here's my 33 spline moser 10 bolt set up in a bubble mercury. Holy body creasing! Tough looking vic I can say that I had a minimum of 6 hours of hammering on that car. I think that it helps out quite a bit. Nate ended up getting first place and maddog with that car. It ended up packing in very nicely.
|
|
|
Post by bender10 on Oct 14, 2011 8:50:33 GMT -5
Any after pics?
|
|
68X
Heat Winner
Posts: 419
|
Post by 68X on Oct 15, 2011 15:19:59 GMT -5
I will see if i can find some.
|
|
|
Post by jonesmotorsports on Oct 15, 2011 19:14:47 GMT -5
What are you guys running for a master cylinder with your booster eliminator plates to gain more clearance. I have broke a couple factory masters from my headers lately and looking to buy a different master even if I only can run front brakes took my whole manual brake setup from 73 ford f100 take the pedal and all is only 7 bolts
|
|
|
Post by jonesmotorsports on Oct 15, 2011 19:20:38 GMT -5
will a 89 town car body bolt onto a 03 and newer crown vic frame like stock. I heard it will bolt right onto a 98-02 frame like stock. i just want a car with a hard front. ive seen these 03 and newers put in work with the front. thats why im asking. or should i just run what i have and tilt it at the boxes. also if i tilt it how far should i go. thanks nobody seems to want to give a straight answer on this ill let you know when i do mine
|
|